086-515-80616111
info@tigstools.com
PRODUCT
PRODUCT
S15700M
Deep tillage plow, the collective name for plows designed to plow deeper than the general purpose plow. Such as spar plow with deep pine shovel and deep tiller with only chisel-shaped, duck-web-shaped or double-wing-shaped deep soil shovel. The former works when the plow body to the tillage layer for conventional tillage, deep pine shovel loosening the lower layer of soil, improve its permeability or water storage; the latter only for the hard bottom layer under the tillage layer for deep pine without turning soil, operating depth of up to 40 ~ 60 cm, used for deep tillage of saline land, white pulp soil improvement and soil protection tillage.
key word:
Category:
Testing
Product accessories:
Hotline:
S15700M
Deep tillage plow, the collective name for plows designed to plow deeper than the general purpose plow. Such as spar plow with deep pine shovel and deep tiller with only chisel-shaped, duck-web-shaped or double-wing-shaped deep soil shovel. The former works when the plow body to the tillage layer for conventional tillage, deep pine shovel loosening the lower layer of soil, improve its permeability or water storage; the latter only for the hard bottom layer under the tillage layer for deep pine without turning soil, operating depth of up to 40 ~ 60 cm, used for deep tillage of saline land, white pulp soil improvement and soil protection tillage.
1, in the operation of deep pine machine before, the agricultural mechanics need to carefully read the code of practice, familiar with the performance of deep pine machine, understand its structure and the adjustment method of each operating point.
2, in the deep pine machine before work, check whether the parts are complete, there is no deformation or damage, the adjustment mechanism is flexible, the nuts are tight. If there are problems should be adjusted in time.
3, in the deep pine machine start, the tractor should be low speed, so that the deep pine shovel by self-weight gradually into the soil predetermined depth. In the course of operation, should maintain a uniform speed straight ahead.
4, in the process of deep pine machine operation, do not allow the adjustment, found abnormal phenomenon, should immediately stop to check, troubleshooting before continuing to work.
5, deep pine machine operation is over, should be deep pine machine landing to the ground, can not be suspended and parked, should promptly remove the deep pine machine on the soil, weeds, check whether the parts are damaged or not.
上一页
无
下一页
Key Products
Message
*Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible